1
/
of
9
東瀛本物 PLJ BY PLATEAUX
Japanese-made ALPHAX doctor medical care series Pita Skin Japanese-made ultra-thin 0.6mm knee pads (beige)
Japanese-made ALPHAX doctor medical care series Pita Skin Japanese-made ultra-thin 0.6mm knee pads (beige)
Regular price
HK$223.00
Regular price
Sale price
HK$223.00
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
Zero seams for a perfect fit around your knees!
It fits snugly, as if blending with your skin, and stabilizes your knee.
Eliminates common knee brace discomfort such as stiffness and cramping.
Approximately 0.6 mm thin, the fit feels like it blends in with the knee.
Support is adjusted via resin printing, eliminating the need to add side straps.
It's soft and smooth on the skin so you can wear it all day without any discomfort
It fits your knees perfectly, allowing you to walk, bend and stretch with ease.
[Adjust support force by combining dotted resin printing]
Adjust the print area based on knee movement.
Areas that require greater stability are printed at a finer density.
・The soft resin bones on both sides have a splint effect and support the bending and straightening of the knee joint.
・Ultra-thin material with a thickness of approximately 0.6mm. You can walk smoothly without feeling uncomfortable!
・The area around the board is reinforced with high-density printing to stabilize the knees and prevent shaking when walking.
・360° elastic material does not hinder any activities.
- Breathable tricot fabric.
- Does not show easily on pants.
Applicable persons
・Unsteady walking
・Need to stabilize the knee
・Daily use
Developed with orthopedic surgeons
Expert from the Japanese Orthopedic Society
Orthopedic Clinic Director Gu Zhijian Mian
`
Eliminate stiffness and cramping when wearing a brace.
The brace feels like it blends in with your skin, allowing you to wear it while walking or bending without feeling any discomfort.
●Made in Japan
●Washable
It fits snugly, as if blending with your skin, and stabilizes your knee.
Eliminates common knee brace discomfort such as stiffness and cramping.
Approximately 0.6 mm thin, the fit feels like it blends in with the knee.
Support is adjusted via resin printing, eliminating the need to add side straps.
It's soft and smooth on the skin so you can wear it all day without any discomfort
It fits your knees perfectly, allowing you to walk, bend and stretch with ease.
[Adjust support force by combining dotted resin printing]
Adjust the print area based on knee movement.
Areas that require greater stability are printed at a finer density.
・The soft resin bones on both sides have a splint effect and support the bending and straightening of the knee joint.
・Ultra-thin material with a thickness of approximately 0.6mm. You can walk smoothly without feeling uncomfortable!
・The area around the board is reinforced with high-density printing to stabilize the knees and prevent shaking when walking.
・360° elastic material does not hinder any activities.
- Breathable tricot fabric.
- Does not show easily on pants.
Applicable persons
・Unsteady walking
・Need to stabilize the knee
・Daily use
Developed with orthopedic surgeons
Expert from the Japanese Orthopedic Society
Orthopedic Clinic Director Gu Zhijian Mian
`
Eliminate stiffness and cramping when wearing a brace.
The brace feels like it blends in with your skin, allowing you to wear it while walking or bending without feeling any discomfort.
●Made in Japan
●Washable
Applicable size/weight (approximately)
Knee Wai/
M: 33-41cm/20g
L: 38-46cm/22g
*Please measure approximately 8cm above the center of the kneecap.
Knee Wai/
M: 33-41cm/20g
L: 38-46cm/22g
*Please measure approximately 8cm above the center of the kneecap.
Individual package size/weight (approx.)
Width 11 x Height 21 x Thickness 1.3 (cm)/m: 50 g, Length: 52 g
Width 11 x Height 21 x Thickness 1.3 (cm)/m: 50 g, Length: 52 g
[ALPHAX Authorized Dealer]
■Origin: Japan ■Materials/Components: Main body: nylon, polyurethane, other bone parts: polyurethane ■Packaging: independent box
Zero seams, it fits perfectly on your knees!
It fits snugly, as if it were integrated with your skin, and stabilizes your knees.
Eliminates the complaints of common knee supports such as stiffness and cramping.
Approximately 0.6mm thin, the fit feels like it's integrated with your knee.
We purposely did not add side belts and adjusted the support power with resin printing.
It's soft and smooth on the skin, so you can wear it all day without any discomfort.
It snuggles perfectly against your knees, making it easy to walk, bend over, and stretch.
[Combine dot resin print to adjust support power]
Adjust the print area according to the movement of the knee.
Areas that require greater stability are printed with a finer density.
・The soft resin bones on both sides support the bending and straightening of the knee joint with a splint effect.
・Ultra-thin material with a thickness of approximately 0.6mm. You can walk smoothly without feeling uncomfortable!
・The area around the plate is reinforced with fine-density printing to stabilize the knees from shaking when walking.
・360° stretch material that does not hinder any movement.
- Breathable tricot fabric.
- Does not easily show on pants.
For people like this
・Unstable walking
・I want to stabilize my knees
・For everyday use
Joint development with orthopedic surgeons
Specialist of the Japanese Orthopedic Society
Gushiken Orthopedic Clinic Director Tsutomu Gushiken
Eliminates stiffness and cramped feeling when wearing a supporter.
This supporter feels as if it is integrated with your skin, allowing you to wear it without any discomfort while walking or bending over.
●Made in Japan
●Washable
It fits snugly, as if it were integrated with your skin, and stabilizes your knees.
Eliminates the complaints of common knee supports such as stiffness and cramping.
Approximately 0.6mm thin, the fit feels like it's integrated with your knee.
We purposely did not add side belts and adjusted the support power with resin printing.
It's soft and smooth on the skin, so you can wear it all day without any discomfort.
It snuggles perfectly against your knees, making it easy to walk, bend over, and stretch.
[Combine dot resin print to adjust support power]
Adjust the print area according to the movement of the knee.
Areas that require greater stability are printed with a finer density.
・The soft resin bones on both sides support the bending and straightening of the knee joint with a splint effect.
・Ultra-thin material with a thickness of approximately 0.6mm. You can walk smoothly without feeling uncomfortable!
・The area around the plate is reinforced with fine-density printing to stabilize the knees from shaking when walking.
・360° stretch material that does not hinder any movement.
- Breathable tricot fabric.
- Does not easily show on pants.
For people like this
・Unstable walking
・I want to stabilize my knees
・For everyday use
Joint development with orthopedic surgeons
Specialist of the Japanese Orthopedic Society
Gushiken Orthopedic Clinic Director Tsutomu Gushiken
Eliminates stiffness and cramped feeling when wearing a supporter.
This supporter feels as if it is integrated with your skin, allowing you to wear it without any discomfort while walking or bending over.
●Made in Japan
●Washable
Share
